tape adhesive
High-strength adhesive for exterior and interior use
- Application
- Tapes and reinforcing corners
- Packaging
- 7 kg; 18 kg
Site language
Adhesives
Ready-to-use moisture-resistant wallpaper adhesive
Fiberglass, fiberglass, non-woven and heavy wallpaper
Ready-made water-based, moisture-resistant polyvinyl acetate adhesive for gluing glass wallpaper, painting fiberglass, painting non-woven fabric, textile fiber wallpaper and other heavy wallpaper in rooms with high humidity. When diluted, it can be used for paper and vinyl wallpaper only in dry rooms. Substrates: concrete, mineral, cement and gypsum bases, plasterboard, chipboard, fiberboard, etc.
Waterproof adhesive for all types of wallpaper with very high adhesion.
Prime the surface with deep penetration primer PROMIX, highly absorbent surfaces with Mittelgrunt. Level the surface PROMIX F, for large unevenness - PROMIX H. After complete drying, the surface should be dry and clean. Do not stick glass wallpaper onto greasy stains and oil-based paint without first cleaning it. Prime the surface with glue diluted 10% with filtered water. Apply the finished glue to the wall, immediately glue the canvas and smooth it with a plastic spatula. Within 30 minutes the blade can be adjusted. Painting glass wallpaper - no earlier than 24 hours after gluing.
Wide brush, paint roller, paint sprayer.
Drying time depends on the thickness of the layer, temperature and humidity, and surface properties.
Store above +5 °C.
5 cycles.
12 months.
Bucket 10 kg.
A technical sheet for this material can be requested from a PROMIX specialist.