Betonokontakt
Primer for exterior and interior use
- Application
- Adhesive preparation of dense substrates
- Packaging
- 14 kg
Site language
Primers
Concentrated primer for highly absorbent substrates
For treating absorbent surfaces: gas and foam concrete, ceramic and silicate bricks, concrete, cement and gypsum screeds, expanded clay and cinder blocks, cement and gypsum plasters. Used to strengthen the base, reduce absorbency and increase adhesion when plastering, puttying, decorative finishing, painting, wallpapering; before self-leveling mixtures, tile adhesives and polymer waterproofing mastics. For external and internal works.
Reduces and evens out the absorbency of the base.
Aqueous polymer dispersion, technological additives, water.
The surface must be durable, clean, dry, free from separating substances and have load-bearing capacity.
| Base | Concentrate: water | Primer solution consumption, kg/m² |
|---|---|---|
| Gas and foam concrete | 1:5 | 0,30 |
| Sand-lime brick | 1:4 | 0,25 |
| Expanded clay concrete / slag concrete | 1:4 | 0,25 |
| Ceramic brick | 1:3 | 0,20 |
| Cement / gypsum plaster | 1:3 | 0,20 |
| Cement / gypsum screed | 1:3 | 0,20 |
| GKL / GVL | 1:3 | 0,20 |
The table scrolls horizontally.
Brush, roller, paint sprayer. Clean the tool with water immediately after use.
Drying time depends on the thickness of the layer, temperature and humidity, and surface properties.
Store above +5 °C.
5 cycles.
12 months.
Bucket 10 kg; 15 kg.
A technical sheet for this material can be requested from a PROMIX specialist.