Site language
Fillers
Basic finishing filler for interior use
Finish alignment; mainly machine application
For fine leveling of most types of indoor wall and ceiling surfaces: plasterboard, concrete, plaster, etc.
Increased whiteness and adhesion, plasticity, minimal shrinkage, absence of cracks, high mechanical strength, ease of application, increased time for smoothing, easy sandability.
Ground micro-marble, styrene-acrylic dispersion, bactericidal additives, special plasticizers, fillers, water.
Mix thoroughly. The base is clean, dry and strong. Treat loose and highly absorbent surfaces with deep penetration primer PROMIX. Irregularities with a depth of more than 3 mm must first be leveled with PROMIX H. Apply preferably mechanically, followed by smoothing with a spatula; Manual application is allowed. Carry out work at a temperature not lower than +5 °C; When sanding, use protective equipment.
Mainly machine application followed by smoothing with a spatula; Manual application with a spatula is possible.
Drying time depends on the thickness of the layer, temperature and humidity, and surface properties.
Store above +5 °C.
5 cycles.
18 months.
Bucket 18 kg; 25 kg. Plastic bag 25 kg.
№ RU.54.HC.01.008.E.000359.04.26
from
PDF · 2 pages · Original document in Russian
A technical sheet for this material can be requested from a PROMIX specialist.
A harder surface after drying. Thick-layer levelling filler for interior use.
Easier to sand after drying. Thick-layer levelling filler for interior use.
Joint filler for exterior and interior use