Site language
Fillers
Easier to sand after drying. Thick-layer levelling filler for interior use.
For sealing damage, cavities and cracks, as well as leveling concrete, plaster, plasterboard and other surfaces.
Increased adhesion, minimal shrinkage, high mechanical strength, dry sandability, does not interfere with diffusion, ductility and long operating time.
Ground micro-marble, styrene-acrylic dispersion, bactericidal additives, special plasticizers, fillers, water.
Stir before use. The base is clean, dry and strong; remove peelings. Treat loose and highly absorbent surfaces with deep penetration primer PROMIX. Apply mechanically or manually in an even layer, smoothing with a spatula. For a smoother surface, use finishing putties Pro Spray or PROMIX F in the last layer. Carry out work at a temperature not lower than +5 °C; When sanding, use protective equipment.
Spatula, mechanical application.
Drying time depends on the thickness of the layer, temperature and humidity, and surface properties.
Store above +5 °C.
5 cycles.
18 months.
Bucket 1,5 kg; 4,5 kg; 18 kg; 25 kg. Plastic bag 25 kg.
№ RU.54.HC.01.008.E.000359.04.26
from
PDF · 2 pages · Original document in Russian
A technical sheet for this material can be requested from a PROMIX specialist.
A harder surface after drying. Thick-layer levelling filler for interior use.
Joint filler for exterior and interior use
Multifunctional finishing coating for interior use