Site language
Fillers
Joint filler for exterior and interior use
Seams and local defects
For sealing joints of concrete and gypsum slabs.
Increased adhesion, minimal shrinkage, high mechanical strength, dry sandability, does not interfere with diffusion, ductility and long operating time.
Ground micro-marble, styrene-acrylic dispersion, bactericidal additives, special plasticizers, fillers, water.
Mix thoroughly before use. The base must be clean, dry and sound. Before application, treat with deep penetration primer PROMIX. Fill the seams with a spatula to a depth of no more than 6 mm; process deeper seams in several stages with drying 24 hours. Carry out work at a temperature not lower than +5 °C; When sanding, use protective equipment.
Spatula.
Drying time depends on the thickness of the layer, temperature and humidity, and surface properties.
Store above +5 °C.
5 cycles.
18 months.
Bucket 1 kg; 2,5 kg; 6 kg; 12 kg.
№ RU.54.HC.01.008.E.000359.04.26
from
PDF · 2 pages · Original document in Russian
A technical sheet for this material can be requested from a PROMIX specialist.
A harder surface after drying. Thick-layer levelling filler for interior use.
Easier to sand after drying. Thick-layer levelling filler for interior use.
Multifunctional finishing coating for interior use