Site language
Fillers
Multifunctional finishing coating for interior use
For mechanical finishing of smooth, previously prepared surfaces of walls and ceilings indoors: gypsum board, gypsum/cement plaster, putty, old coatings, MDF, plywood, etc. Can be used as an independent finishing coating that does not require sanding and subsequent painting.
Self-coating; gives a smooth painted surface; does not require grinding; strengthens the base, hides minor irregularities and defects, evens out the color of the base; tinting according to RAL.
Ground micro marble, styrene-acrylic dispersion, special plasticizers and additives, water.
For walls and ceilings in dry rooms and rooms with moderate humidity. Mix the composition thoroughly; if necessary, dilute with water to working viscosity. The base must be level, clean, dry and durable. Options: as a primer - strengthens and evens out color; as a putty - combines priming and puttying, smoothes out minor defects, without subsequent sanding; as a finishing coat - it combines three operations and gives a finished base in color. Carry out work at a temperature not lower than +5 °C.
Roller, mechanical application.
Drying time depends on the thickness of the layer, temperature and humidity, and surface properties.
Store above +5 °C.
5 cycles.
18 months.
Bucket 18 kg; 25 kg.
№ RU.54.HC.01.008.E.000359.04.26
from
PDF · 2 pages · Original document in Russian
A technical sheet for this material can be requested from a PROMIX specialist.
A harder surface after drying. Thick-layer levelling filler for interior use.
Easier to sand after drying. Thick-layer levelling filler for interior use.
Joint filler for exterior and interior use