Site language
Fillers
Facade filler for exterior and interior use
Facades and interior surfaces
For finishing facades, as well as walls and ceilings indoors: concrete, brick, plaster, gypsum boards, etc.
Easy to apply, high adhesion; weather resistance, resistance to mechanical stress, high elasticity, moisture resistance and permeability.
Ground micro-marble, styrene-acrylic dispersion, bactericidal additives, special plasticizers, fillers, water.
Mix thoroughly. The base is clean, dry and strong. Before application, treat with deep penetration primer PROMIX. Apply mechanically or manually in an even layer, smoothing with a spatula. Carry out work at daytime temperatures not lower than +5 °C, at night - +2 °C, in the absence of precipitation. When sanding, use protective equipment.
Spatula, roller, mechanical application.
Do not carry out work during precipitation. Drying time depends on the thickness of the layer, temperature and humidity, and surface properties.
Store above +5 °C.
5 cycles.
18 months.
Bucket 0,9 kg; 4,5 kg; 18 kg; 25 kg. Plastic bag 25 kg.
№ RU.54.HC.01.008.E.000359.04.26
from
PDF · 2 pages · Original document in Russian
A technical sheet for this material can be requested from a PROMIX specialist.
A harder surface after drying. Thick-layer levelling filler for interior use.
Easier to sand after drying. Thick-layer levelling filler for interior use.
Joint filler for exterior and interior use