Site language
Fillers
Moisture-resistant filler for high-humidity rooms
Leveling in damp rooms
For leveling most types of wall and ceiling surfaces in rooms with high humidity: gypsum boards, concrete, plaster, etc.
Increased whiteness and adhesion, plasticity, minimal shrinkage, absence of cracks, high mechanical strength, ease of application.
Ground micro-marble, styrene-acrylic dispersion, bactericidal additives, special plasticizers, fillers, water.
Mix thoroughly. The base must be clean, dry and sound. Before application, be sure to treat the base with deep penetration primer PROMIX. Apply mechanically or manually in an even layer, smoothing with a spatula. Carry out work at a temperature not lower than +5 °C; When sanding, use protective equipment.
Spatula, mechanical application.
Drying time depends on the thickness of the layer, temperature and humidity, and surface properties.
Store above +5 °C.
5 cycles.
18 months.
Bucket 1,5 kg; 4,5 kg; 18 kg; 25 kg. Plastic bag 25 kg.
№ RU.54.HC.01.008.E.000359.04.26
from
PDF · 2 pages · Original document in Russian
A technical sheet for this material can be requested from a PROMIX specialist.
A harder surface after drying. Thick-layer levelling filler for interior use.
Easier to sand after drying. Thick-layer levelling filler for interior use.
Joint filler for exterior and interior use