Site language
Fillers
Vandal-resistant filler for exterior and interior use
Surfaces with high service load
For finishing facades, walls and ceilings indoors. It is especially recommended for places with increased operational load: walls of staircases and flights, halls, corridors, offices, children's and educational institutions.
Easy to apply, high adhesion; weather resistance, resistance to mechanical and climatic influences and aggressive industrial air pollution; high elasticity, moisture resistance and permeability.
Ground micro-marble, styrene-acrylic dispersion, bactericidal additives, special plasticizers, fillers, water.
Stir. The base must be clean, dry and sound. Fill in any unevenness with PROMIX H. Before application, treat with deep penetration primer PROMIX. Apply mechanically or manually in an even layer, smoothing with a spatula. Carry out work at daytime temperatures not lower than +5 °C, night temperatures +2 °C and without precipitation. When sanding, use protective equipment.
Spatula, roller, mechanical application.
Do not carry out work during precipitation. Drying time depends on the thickness of the layer, temperature and humidity, and surface properties.
Store above +5 °C.
5 cycles.
18 months.
Bucket 18 kg; 25 kg. Plastic bag 25 kg.
№ RU.54.HC.01.008.E.000359.04.26
from
PDF · 2 pages · Original document in Russian
A technical sheet for this material can be requested from a PROMIX specialist.
A harder surface after drying. Thick-layer levelling filler for interior use.
Easier to sand after drying. Thick-layer levelling filler for interior use.
Joint filler for exterior and interior use